| Document |
Document Title |
|
JP2001066746A |
To obtain an overcoat for an image recording element having satisfactory scratch resistance and water resistance. An overcoating composition for an image recording material contains 30-95 wt.% hydrophobic polymer particles having 0.01-0....
|
|
JP2001066747A |
To ensure light stability as well as to form an overcoat having high water resistance, scratch resistance and fingerprint resistance by drying under common drying conditions by incorporating a 1H-pyrazolo[1,5-b][1,2,4]triazole type magen...
|
|
JP3146383B2 |
PURPOSE: To prevent fade of a dyestuff under low humidity and to improve storage stability of the concentrated composition by incorporating plural kinds of specified compounds. CONSTITUTION: The stabilizing solution for the silver halide...
|
|
JP3146380B2 |
PURPOSE: To prevent the deposition of solid matter or deposition of foreign matter by incorporating a compd. expressed by specified formula into a stabilizer liquid and specifying the amt. of replenisher for the stabilizer liquid to a sp...
|
|
JP3145786B2 |
PURPOSE: To drastically lessen the loss of chemicals. CONSTITUTION: In the processing method for photographic materials for executing at least one of another chemical processing after development, washing is executed before or after the ...
|
|
JP3143713B2 |
|
|
JP3143639B2 |
PURPOSE: To forum images superior in image stability even in the case of processing a large amount of photosensitive materials and to prevent occurrence of silver sludge in a developing solution by processing the exposed photosensitive m...
|
|
JP3138723B2 |
PURPOSE: To obtain a displayed substance excellent in flatness even in the case of displaying a canvas picture obtained by sticking a photographic element on thin cloth in any display method. CONSTITUTION: An image is formed on an image ...
|
|
JP2001051380A |
To make suppressible the contamination of the surface of a printing plate for transfer and to make efficiently transferrable a light reflecting bar code to the end face disk of a photographic film spool shaft by using a leaf-putting film...
|
|
JP2001043527A |
To provide a transparent magnetic recording medium having a coating surface excellent in surface properties and reliable magnetic input/output performance and to provide a silver halide photosensitive material containing the transparent ...
|
|
JP2001033912A |
To obtain a silver halide photographic sensitive material having ultrahigh contrast and excellent in scuffing, wear and stain resistances by incorporating a urethane latex, a fluorine-containing surfactant and a lubricant into the outerm...
|
|
JP2001019793A |
To provide a method for recovering a high quality cellulose plastic at low cost by removing colored foreign matter and insoluble content (including gel generating foreign matter) when doped in a short processing time.Cellulose plastic ma...
|
|
JP3126257B2 |
PURPOSE: To prevent the photosensitive material having a magnetic recording layer on the backing layer of a film from attaching of dust by processing the photosensitive material in a final in a final bath containing at least cane kind of...
|
|
JP2001010267A |
To provide an improved photograph folder assembly and album, which holds photograph prints and invisibly keeps the supplementary information on the photograph prints.A folder assembly 100 has a folder 14 having at least one pocket 16. Ea...
|
|
JP3124858B2 |
PURPOSE: To prevent production of irregular dots by reflection in an automatic developing machine having a drying zone where a heat transmitting body is used, by incorporating a specified silver halide emulsion into at least one silver h...
|
|
JP2001005156A |
To provide a method for processing silver halide photographic sensitive material prevented from occurrence of a fur, while saving water, and that of silver sludge in a rinsing bath and that of blue dye stains on a processed film.The silv...
|
|
JP3116196B2 |
PURPOSE: To reduce rise of fogging with the lapse of time, while allowing the characteristics of a yellow coupler superior in color reproduction performance and color developing performance to be fully exhibited, by incorporating a speci...
|
|
JP3115849B2 |
To provide a recovering method for a photographic film in which particle sizes of a synthetic resin material as a main raw material of the photographic film are selected to manufacture a recovered resin material and also recovering silve...
|
|
JP2000338626A |
To obtain a photographic element with a formed image and with a protective overcoat on the top of an overcoat.A protective overcoat is formed before a photographic element with at least one silver halide photosensitive emulsion layer is ...
|
|
JP2000330236A |
To obtain an image forming element with a discontinuous overcoat that is converted into a protective overcoat as a continuous coating film by fusing operation after processing by specifying the proportion of a region not covered with a p...
|
|
JP2000330250A |
To obtain a photographing film from which a photograph can be incorporated into a multicard, a pendant or the like without labor such as pasting. The photographing film has a imaging part 1 with an imaging face 1a in which an image is fo...
|
|
JP2000321740A |
To form a print for preservation and a copied film inexpensively with water-proof and light resistance without the risk of the occurrence of wrinkle and air bubble in the middle of sticking. This sheet cover is constituted by providing a...
|
|
JP2000321739A |
To obtain an appropriate material for forming a protective overcoat on a photographic element and to form the protective overcoat. This method consists of a step where a hydrophobic polymer coating is applied over a silver halide photose...
|
|
JP3110392B2 |
To improve an operating efficiency by automatically coping with a change of a thickness of a postcard. The postcard feeder comprises a postcard cassette 25 for containing postcards 26 of a laminated state, a fixed roller 21 disposed at a...
|
|
JP3107252B2 |
PURPOSE: To store, copy and retrieve a microfilm as it is by protecting the microfilm surface covering it with a transparent protective film. CONSTITUTION: The edge of a protective film 2 having about the same size as one surface of a mi...
|
|
JP2000305223A |
To enable anyone to make development processing while visually observing the effect of development in a bright room by previously processing a black and white print, color print and black and white positive film and color positive film. ...
|
|
JP2000305224A |
To provide a method for processing the silver halide photographic sensitive material capable of rapid processing and low in tendency to cause fog and capable of drying the material to an optimal state and good in the dimensional stabilit...
|
|
JP2000292879A |
To obtain a silver halide photographic sensitive material for a photomechanical process having ultrahigh contrast and excellent in dot quality even in the case of a short exposure time by carrying out exposure under specific conditions a...
|
|
JP2000292891A |
To provide a processing method a silver halide photographic sensitive material by which the dot quality of a processed film is not deteriorated even is water-waving processing is carried out by incorporating 2-(p-hydroxyphenyl) glyoxyloh...
|
|
JP2000284430A |
To make it possible to lessen the influence of the temperature fluctuation of a negative film at the time of printing, to lessen the influence of a pH fluctuation of a color development processing liquid, to improve concentration stabili...
|
|
JP2000284445A |
To obtain a rinsing liquid for silver halide photographic sensitive materials which eliminates the remaining of colors in the process photosensitive material and is capable of processing the photosensitive material without problems even ...
|
|
JP3095847B2 |
PURPOSE: To enhance stability and abrasion resistance of a color image, and preservable property of the processing solution, and to improve yellow stains by incorporating a specified compound obtained by introducing a specified group on ...
|
|
JP2000275806A |
To obtain a homogeneous concentrated one-part type color developing composition capable of replenishment at a low rate by incorporating a specified free base type color developing agent and an antioxidant for the color developing agent. ...
|
|
JP2000275807A |
To provide a method for storage of a rinsing liquid which is capable of maintaining stable performance for a long period right after the production of the rinsing liquid. This method for storage of the washing substitution stabilization ...
|
|
JP2000267241A |
To process a black-and-white silver halide photographic sensitive material without producing fur and silver sludge in the washing tank of an automatic processing machine by incorporating one of specified compounds and an oxidizing agent ...
|
|
JP2000267234A |
To prevent the occurrence of silver sludge in a washing tank even if water is saved and to prevent the deterioration of residual color by using a fixing solution not substantially containing an ammonium salt but containing a specified co...
|
|
JP2000512664A |
This invention relates to a solvent system and process for cleaning cellulose triacetate polymer camera film. The solvent system comprises n-propyl bromide and an alkyl bromide in which the alkyl group contains 4 to 7 carbon atoms.
|
|
JP2000258874A |
To improve color stain and image preservability and to considerably reduce contamination in the washing tank of an automatic processing machine by imagewise exposing a silver halide photographic sensitive material containing a specified ...
|
|
JP2000258866A |
To obtain a silver halide photographic sensitive material with a film free from transparency reduction and sticking and not causing the falling of a matting agent from the surface in processing by incorporating fine particles formed from...
|
|
JP2000258875A |
To suppress uneven drying of a developed silver halide photographic sensitive material in a drying step and to enhance dryability. A silver halide photographic sensitive material having at least one silver halide emulsion layer and at le...
|
|
JP2000258851A |
To obtain a film scanner capable of reading and writing magnetic information from/on film other than APS film by sticking a magnetic tape for recording the magnetic information on the outside of the image frame of the film. On 35 mm film...
|
|
JP2000241950A |
To eliminate contamination, scale and silver sludge in a washing tank while saving water, to prevent deterioration in the dot quality of a film and to prevent contamination on a drying roller by carrying out a washing process or a stabil...
|
|
JP2000221648A |
To feed a stabilizing solution substitutable for washing water or a stabilizing additive capable of preventing the formation of fur even if the amount of washing water is reduced when a silver halide photographic sensitive material is pr...
|
|
JP2000221637A |
To store data on the backside of a photograph by providing coded data to a side of a photographic substrate opposite to a photographic image and using a material which is inconspicuous under ordinary observation conditions but can be rea...
|
|
JP2000199948A |
To obtain an improved method of adhering a photographic element to a base body and to obtain an adhering method to keep the photographic element integrally during exposure and photographic processes. This photographic element consists of...
|
|
JP2000177298A |
To manufacture a decorative sheet for decorating a body to be decorated such as a cloth and a skin on which photographs of idols and printed matters of various characters cut from a magazine or the like are sealed with the non- water-per...
|
|
JP3055695B2 |
Protective overcoat compositions and photographic elements containing same comprise: (a) a hydroxylated latex polymer; (b) a hydrolyzed metal lower alkoxide; and, (c) a fluoroalkyl polyether surface active agent. The overcoat is transpar...
|
|
JP3056246B2 |
The present invention relates to a silver halide photographic transfer element which comprises a support having a front and rear surface, a transfer coating on the front of the support comprising a material capable of holding an image th...
|
|
JP3055696B2 |
Protective overcoat compositions and photographic elements containing same comprise: (a) a water-soluble hydroxylated polymer; (b) a hydrolyzed metal lower alkoxide or mixtures thereof and wherein when said hydrolyzed metal lower alkoxid...
|
|
JP2000171963A |
To remove scratches and other defects from the surface of a photographic material by composing the device of an application device which applies a wax composition to the surface of a moving photographic web and a buffing device which buf...
|
