| Document |
Document Title |
|
JPH04251836A |
PURPOSE: To control a slide projector synchronizing with playing by utilizing an MIDI signal for controlling an electronic musical instrument. CONSTITUTION: A data for controlling the level of sound volume is extracted out of the MIDI si...
|
|
JPH04246638A |
PURPOSE: To always output an accurate reproducing signal without receiving the effect of a spike-state noise. CONSTITUTION: The device is provided with delay means 310 and 311 for delaying an input signal by a specified time and a reprod...
|
|
JPH04246639A |
PURPOSE: To increase recording capacity in the case of recording information for one frame and to drastically lower the reproducing error rate of the information. CONSTITUTION: A multiple recording control means which controls the write ...
|
|
JPH04237037A |
PURPOSE: To prevent the effect of the vibration of a motor for feeding a film without depending on the feeding of film in the case of reading and writing the magnetic recording information of a photographic film. CONSTITUTION: The rotary...
|
|
JPH04233873A |
PURPOSE: To efficiently reduce the influence of a driving noise to sound recording in accordance with a characteristic of a driving noise of an interchangeable lens installed to a camera main body of a video camera. CONSTITUTION: In a dr...
|
|
JPH04229851A |
PURPOSE: To keep off any possible malfunction in a magnetic head through a camera therewith. CONSTITUTION: Each inner wall surface of two guide projections 11c, 11d is made up into a taper form so as to have a distance with these guide p...
|
|
JPH04220630A |
PURPOSE: To perform exposure control suitable for a film used by making effective use of information on the kind of the film which is stored on a magnetic storage portion provided to the film. CONSTITUTION: Film information stored on the...
|
|
JPH04215637A |
PURPOSE: To obtain a camera surely recording data by a simple method by detecting the voltage of a power source for moving a film to control the recording timing. CONSTITUTION: The drive block MD of a motor for taking up or rewinding a f...
|
|
JPH04215638A |
PURPOSE: To record all necessary photographing information magnetically and automatically when performing interval photographing and multiple photographing in combination. CONSTITUTION: A photographing control means 56 performing combine...
|
|
JPH04211236A |
PURPOSE: To provide a camera having a magnetic memory part which performs write-in of information into the magnetic memory part of a film which can be regenerated surely in a laboratory side, with the simple and inexpensive constitution,...
|
|
JPH0479354U |
|
|
JPH04178641A |
PURPOSE: To prevent the deformation of a film and the deterioration of the flatness of the film by releasing a guide member from being brought into press- contact with the end surface of the film in its width direction when the release o...
|
|
JPH04178640A |
PURPOSE: To prevent the leading edge of a film from being caught by a guide member when the film is extruded from a film cartridge by providing a back cover detecting means, a means for detecting the leading edge of a film and a position...
|
|
JPH04178638A |
PURPOSE: To prevent the leading edge of a film from being caught by a guide member at the time of extruding a film from a film cartridge by providing a cartridge detecting means, a means for detecting the leading edge of the film and a p...
|
|
JPH0425701Y2 |
|
|
JPH0425702Y2 |
|
|
JPH04161945A |
PURPOSE: To prevent a film from becoming incapable of being fed by putting a magnetic head and the magnetic memory part of film in pressure contacting each other in linkage with motions of a cartridge sensing member and a film leading ed...
|
|
JPH04161946A |
PURPOSE: To prevent film deformation and generation of strains due to pressure contacting for a long time and preclude deterioration of the film flatness by keeping a pressure contacting member in the condition that the pressure contact ...
|
|
JPH04161939A |
PURPOSE: To prevent a film from becoming incapable of being fed, by providing a back lid sensing member whose condition changes when the back lid is shut and the film leading edge passes the position with a magnetic head, installing a fi...
|
|
JPH04156530A |
PURPOSE: To obtain a printed photograph properly reproduced with the ambient atmosphere such as the foreground and background and reflected with the photographing intention by recording the information on whether the surrounding of a maj...
|
|
JPH04152329A |
PURPOSE: To quickly project a necessary picture photographed on a film, on a screen or a video monitor by combining a film editor, a video camera, and a video projector. CONSTITUTION: The light of a light source 1-1, whose quantity is ad...
|
|
JPH04149414A |
PURPOSE: To effectively utilize a recording part and to obtain a camera excellent in handleability by forming a recording part so that it can be used as a storing means for temporarily storing information used in the case of using a came...
|
|
JPH04149528A |
PURPOSE: To prevent the camera from increasing in size and cost by providing a film feeding means, a read means for sensitivity information on a film, a discriminating means which determines which film is loaded, and a setting means for ...
|
|
JPH04143739A |
PURPOSE: To easily obtain a composite photograph that a photographer intends without any help by forming a composite image by reading data out of input magnetic data at a laboratory and performing multiple printing automatically. CONSTIT...
|
|
JPH04136830A |
PURPOSE: To perform stable magnetic recording and reproducing even in the case of using a film having a photosensitive layer and a magnetic layer by detecting the film take-up quantity of a take-up side spool and controlling the feeding ...
|
|
JPH04134335A |
PURPOSE: To increase the recording quantity of information outside the range of an image by providing a magnetic recording layer, which is used for magnetically recording the information, on the end surface of the width direction of a ph...
|
|
JPH04132468A |
PURPOSE: To attain the audio reproduction with a high stereophonic sense by changing a gain of a variable gain amplifier connecting to left and right microphones in response to an angle signal outputted from an angle detection means corr...
|
|
JPH04128732A |
PURPOSE: To attain reduction in the cost of a camera and the simplification of constitution by providing a pulse generating means generating a pulse signal indicating the moving amount of a film accompanying with a roller member arranged...
|
|
JPH04128831A |
PURPOSE: To prevent an undesired picture from being taken by reproducing plural information from a recording region, simultaneously, detecting the ratio of the information having the highest reproducing frequency out of the reproduced in...
|
|
JPH04128730A |
PURPOSE: To prevent photography of a film when the film is not his or her own by providing discriminating means for discriminating whether an identification mark read out by an identification mark reading means coincides with the identif...
|
|
JPH04125546A |
PURPOSE: To smoothly feed a photographic film by releasing a magnetic head from contacting the magnetic recording layer of the film when a discontinuous part of the photographic film passes the magnetic head. CONSTITUTION: During the con...
|
|
JPH04124627A |
PURPOSE: To improve magnetic recording density and to enhance stability in magnetic recording by making a magnetic recording layer a magnetic stripe layer. CONSTITUTION: Magnetic stripes 4a and 4b are added to both ends in the width dire...
|
|
JPH04121726A |
PURPOSE: To practically use the photographing information of various kinds and to obtain high quality print by reading/displaying information recorded on a film when a printed photograph is produced. CONSTITUTION: A negative film complet...
|
|
JPH04116539A |
PURPOSE: To execute high-density recording within a prescribed range while avoiding expensive and complicated constitution by providing a count means and a correction value calculation means which calculates a correction value based on a...
|
|
JPH04116534A |
PURPOSE: To properly record information extending over the whole of frames by providing a prewinding designation means and a prediction calculation means which predicts and calculates the film feeding speed of the respective frames after...
|
|
JPH04116536A |
PURPOSE: To execute the recording of information within a proper range while expensive and complicated constitution is avoided by providing a storage means and a prediction and calculation means which selects a correction value correspon...
|
|
JPH04114137A |
PURPOSE: To obtain this small-sized and inexpensive camera by providing magnetic heads which are integrally formed with a pressing plate so that the pressing plate and a magnetic gap part have the same plane. CONSTITUTION: The magnetic h...
|
|
JPH04113339A |
PURPOSE: To determine the photodetection range of a colorimetry means according to a subject distance by deciding a light source which is dominant as a subject lighting source from colorimetry information from the colorimetry means. CONS...
|
|
JPH04113343A |
PURPOSE: To improve the accuracy of the relative position relation and verticality between the magnetic storage part and a magnetic head and to smoothly make adjustments for the improvement by pressing a 1st and a 2nd guide member agains...
|
|
JPH0496036A |
PURPOSE: To surely read out information by reversely feeding a film to a position where the information is started to be read out by a feeding means first and reading out the information of an identical part again next when it is decided...
|
|
JPH0490540A |
PURPOSE: To keep the weight balance of a head fixing lever and to smoothly interlock the lever with a film by arranging a magnetic head and an amplifier circuit part on both sides with respect to the movable central shaft of the head fix...
|
|
JPH0486637A |
PURPOSE: To carry out the writhing or reading of information at proper timing by judging that the winding of a film on a film taking-up spool is carried out by means of the detection of a great speed change with a speed detecting means a...
|
|
JPH0471069A |
PURPOSE: To easily retrieve an image relating to a specific speaker out of speaker's voices recorded together with photographing images by providing the camera system with a camera capable of recording voices at the time of photographing...
|
|
JPH0467458A |
PURPOSE: To stably record and read out information to/from the magnetic recording part of a film in respect to the film for a camera wide in its width and not stable in its flatness by providing a roller to guide the film so that the mag...
|
|
JPH0460619A |
PURPOSE: To minimize the wear of a magnetic head without any absence of necessary information by making the magnetic head abuts on the magnetic recording area of a film only for a time which is shorter than the time of preliminary windin...
|
|
JPH0422731U |
|
|
JPH04501014A |
Magnetic recording apparatus for a photographic still camera (6) comprises a magnetic head (60) mounted on a flexure (62) attached to a film platen (30). The head (60) is adapted to contact a magnetic coating on the film adjacent the lip...
|
|
JPH04501021A |
A virtually transparent magnetic layer is included as an additional layer in a color negative film. Information exchange between various users of the film -such as the camera user, the dealer and photofinisher- is carried via plural long...
|
|
JPH04501000A |
PCT No. PCT/EP89/00696 Sec. 371 Date Oct. 31, 1990 Sec. 102(e) Date Oct. 31, 1990 PCT Filed Jun. 22, 1989 PCT Pub. No. WO89/12898 PCT Pub. Date Dec. 28, 1989.A slit radiography device scans a body under examination with a fan-shaped x-ra...
|
|
JPH04501024A |
A virtually transparent magnetic layer (120) is included as an additional layer in a color negative film. Information exchange between various users of the film -such as the camera user, the dealer and photofinisher- is carried via plura...
|
