Document |
Document Title |
JP2983457B2 |
To provide a method for producing an enameled member by which a delicate photographic picture is reproduced by the use of a photographic transfer sheet. A photographic transfer sheet is stuck on the whitened sticking part 3 of an enamele...
|
JP2977774B2 |
|
JP2974679B2 |
|
JP2973456B2 |
|
JP2962504B2 |
|
JP2959404B2 |
PURPOSE: To produce an enameled article with the adhesive strength of a catalyst layer on the surface increased by forming a vitreous coating layer carrying the catalyst layer on the surface of an aluminized steel under specified conditi...
|
JPH11264059A |
To reduce thermal conductivity and improve wear resistance by making at least one layer of a layer like ceramic coating applied on a base body of high density and making at least one of other layer low density. At least one layer of a po...
|
JPH11246834A |
To obtain a tacky body capable of fusing an inorganic substance such as enamel to adherend by ready process without causing liquid sagging, coating unevenness, etc., by including a thermally decomposable tacky agent and inorganic powder ...
|
JP2945266B2 |
PURPOSE: To improve the antibacterial properties and antifungal properties of enameling, at the time of forming an enameling layer on the surface of a metallic substrate, by constituting a frit in a glaze of oxides having a specified com...
|
JP2944652B2 |
To burn the coating substance of a cathode-ray tube panel easily, and prevent the damage of an electron gun. By using a filter selectively penetrating infrared rays having the absorption eigenwavelength of a coating substance, and applyi...
|
JP2946574B2 |
|
JP2937358B2 |
|
JP2937369B2 |
|
JP2934336B2 |
|
JP2931463B2 |
|
JP2930797B2 |
PURPOSE: To provide process for production of an enamel wall plate which can be flattened while the deformation at the time of firing is prevented even if the wall has a window. CONSTITUTION: A base metal sheet 2 having the window 1a and...
|
JP2929610B2 |
|
JP2930796B2 |
PURPOSE: To provide the process for production of the enamel wall plate for the wall plates of elevator cages, doors, etc., which can improve production efficiency. CONSTITUTION: A body metallic plate 1 is subjected to ground coating and...
|
JP2927570B2 |
|
JP2918264B2 |
|
JPH11171591A |
To form a metal oxide layer having optical properties on a substrate without using a solvent and an organometal compound by applying an aq. sol or a sol mixture of a metal oxide on the surface of a cleaned substrate and heating at a spec...
|
JPH11141304A |
To provide a heat resistant turbine wheel and a turbine housing. A housing 12 and turbines 14, 16 are made of heat resistant alloy. Glass films 38, 44 in which pigment grains are diffused are formed on inner surfaces 36 and 42. The glass...
|
JPH11140666A |
To provide an enamel-coated stainless steel sheet free from any defects such as cracks by using a low-temperature burning type frit containing no lead. In an enamel-coated stainless steel sheet, a ferritic stainless steel sheet with the ...
|
JPH11131261A |
To provide a glazed article capable of being furnished in various colors and having a photocatalysis function. The glazed article is the laminate of a substrate 14, a masking layer 16, a colored layer 18 and a photocatalyst bed 20 as the...
|
JPH11124663A |
To effectively and efficiently execute the heating of a metallic roll base material for thermally spraying a glass material by subjecting a rotatively held metallic roll base material to total heating, furthermore partially subjecting it...
|
JPH11117079A |
To prevent the occurrence of cracking and peeling caused by heating and impact in a metallic member and to maintain its fine appearance by dispersedly fixing glass fine particles to the surface of a metallic member and oxidizing the surf...
|
JPH11106942A |
To execute enameling of a steel plate eliminating a pickling process without controlling the surface roughness by adhering a film of iron phosphate in a specific quantity on the surface of the steel sheet. An adhesion amt. of a film of i...
|
JP2881847B2 |
A coating composition for forming an inorganic film on a glass, ceramic, metal or plastic surface is obtained by hydrolyzing and condensing a metal alkoxide of the general formula: M(OR)n wherein M represents a metal atom, R represents a...
|
JP2874758B2 |
|
JPH1171686A |
To produce a porcelain enameled stainless steel sheet on which rain stripe stains are suppressed and suitable as exterior building materials maintaining a beautiful surface over a long period. This porcelain enameled stainless steel shee...
|
JP2866923B2 |
|
JPH1143386A |
To obtain a glazing agent that has excellent weather resistance and chemical resistance without anxiety of environmental pollution, as a large level of temperature drop of glazing is realized. The glaze composition comprises, in mol.%, 4...
|
JP2850229B2 |
A batch type furnace includes a furnace body (1), a floor (2) being removably attachable to the furnace body (1) for forming a furnace chamber, and radiant tubes (3a, 3b, 3c) being substantially and uniformly arranged in the furnace body...
|
JPH1123158A |
To prevent a furnace from enlarging, and make it excellent in economical efficiency, and enable it to withstand even a long spell of operation, with baking temperature equal, in spite of being a burner system of kiln provided with a radi...
|
JPH1112764A |
To easily form a coating layer having a good adhesion property at a low cost by sputtering metal near the devoid part of the glass coating layer on the surface of a base material for glass coated products to coat this part, then thickly ...
|
JPH10338554A |
To obtain a composite material excellent in compressive rupture strength by winding a metallic thin wire and a glass thin wire for enamel in a specific ratio on a core material to laminate, taking out the core material from the resultant...
|
JPH10337477A |
To keep a long service life of the product and to exhibit excellent photocatalystic performance by incorporating substance having photocatalystic performance and substance for activating the photocatalystic performance in a base material...
|
JPH10330965A |
To provide an enamelted Al plated steel sheet suitable as exterior materials in which Fallstreifen stains are suppressed and the beautiful surfaces are maintained over a long period. This enameled Al plated steel sheet is the one in whic...
|
JPH10310879A |
To prevent the mixing of dust into a bottle filling molten glass by arranging a positioning member for positioning the bottle at the position where a pipe is brought into contact with the inner periphery of an upper opening hole part of ...
|
JP2813628B2 |
|
JPH10280168A |
To provide a process for producing an enamel member capable of reproducing an extremely meticulous color photograph by using photograph transfer sheets. A stage for firing glaze corresponding to the finish color of an enamel surface excl...
|
JP2804085B2 |
|
JPH10251872A |
To obtain an enameled Al-plated steel sheet excellent in resistance against stained streak by rain by coating SiO2-Na2O base enamel glaze having a specific value of softening point and a specific grain size on the Al-plated steel sheet a...
|
JP2796170B2 |
|
JP2796123B2 |
There is provided a method of repairing a damaged portion in the glass layer of glass-lined steel equipment wherein, as a first step, a first repair medium is applied to the damaged portion, solidified and adhered chemically to the steel...
|
JP2796117B2 |
|
JPH10212589A |
To surely and easily inspect the corrosion degree of a glass layer by forming an identification part capable of being visually identified when the upper glass layer is corroded in a different region on the specified glass layer of the gl...
|
JPH10212546A |
To produce a cold rolled steel sheet for enameling excellent in enameling properties and formability and good in surface and to provide a method for economically producing it. This steel sheet has a compsn. contg. ≤0.003% C, Mn by 0.2 ...
|
JPH10188922A |
To provide a battery case with excellent heat resistance, insulating ability, wear resistance, coat separation strength and coat hardness. This battery case has an inorganic glass coating layer 2 with a thickness of 30-80μm formed on on...
|
JP2776671B2 |
|