| Document |
Document Title |
|
JP2011036629A |
To prevent a blade body from breaking due to cutting strings, packing bands, etc. by a blade section of the blade body which does not project from the tip end part of a holder.A cutter knife with a blade breaking protecting function is p...
|
|
JP4596811B2 |
An index cutter (I) forms a thumb index on a sheet. The index cutter (I) includes: a flat plate-shaped first base member (1) having a first blade portion; and a flat plate-shaped second base member (2) rotatable coupled to the first base...
|
|
JP2010264004A |
To provide a cutter knife capable of cutting an object by pressing a cutting blade on the object always with a constant pressure. The cutter knife includes: a cutter body 1 having a sliding contact part 20 to slide in contact with the ob...
|
|
JP3162843U |
To provide a slider of a cutter which can be pushed and moved smoothly and can save labor. A slider has an upper slide element, a lower slide element, and an elastic tab. The upper slide element has two protrusions that are laterally for...
|
|
JP4535491B2 |
|
|
JP3161825U |
To provide a cutter knife which can easily open not only a string but also a package packed with an adhesive tape without damaging the contents. In a cutter knife provided with a cutter blade at one end of a cutter holder for cutting a s...
|
|
JP4457171B1 |
To provide a cutting tool provided with a cutting assisting device and a cutting assisting device, in which the cutting operation is smoothly performed and the cutting edge of the cutting blade is surely prevented from biting into a non-...
|
|
JP3158059U |
To provide a practical multifunctional knife by combining two knives for different purposes and scissors into one, having a structure that can be folded more compactly, and having a hygienic and safe movable / connecting portion. In orde...
|
|
JP2010000320A |
To allow a quick cutter to be easily used by relaxing the restriction on a putting place, for solving the problem that it takes labor and time to draw out the cutter from a drawer upon using when the cutter is kept in the drawer and it i...
|
|
JP4357414B2 |
A cutter is composed of a Ni-Cr alloy containing from 32 to 44 mass percent of Cr, from 2.3 to 6.0 mass percent of Al, the balance being Ni, impurities, and additional trace elements and having a Rockwell C hardness of 52 or more. This N...
|
|
JP2009247854A |
To provide a cutter knife 1 which is excellent in safety by prohibiting a person other than the user from handling the cutter knife to prevent the cutter blade 4 from being projected from a holder 3.The cutter knife 1 includes a holder 3...
|
|
JP2009185594A |
To solve a present problem that, an existing corner cutter as a tool available in the market for cutting a flexural floor finishing material at a corner of planes perpendicular to the floor face has a blade whose angle is fixed, and thus...
|
|
JP4277107B2 |
|
|
JP3150754U |
To provide a cutter knife capable of cutting a folded paper straight and neatly. The slider 3 is shaped so that the blade 1 is set face down, and the blade 1 is shaped so as to come out in parallel at a position very close to the surface...
|
|
JP2009516553A |
The knife has a handle (2) attached at the rear of a sheath (1), and a blade (3) sliding in the sheath in a manner to completely retract in the sheath or to exceed to the front of the sheath. A blade actuating system has a trigger (11) t...
|
|
JP2008264009A |
To provide a cutter knife capable of easily and swiftly performing the cutting with a blade body and safely and securely storing, collecting and scrapping cut pieces.The cutter knife has a grip case having a storage groove for storing th...
|
|
JP2008270129A |
To solve the defects that operation must be performed twice for opening/closing a switch in combination with other mechanisms, and that the designs with enhanced safety and operability by increasing a switch fitting in size and lowering ...
|
|
JP4171645B2 |
|
|
JP4171682B2 |
|
|
JP2008220913A |
To provide a retractable knife capable of freely adding and changing an additional function in the retractable knife.Cuts for fixing attachments are arranged in the back part of a guide to be a guide for putting-in/taking-out a cutter bl...
|
|
JP2008212351A |
To provide a letter opener normally having a structure used as a letter opener and capable of being used as a cutter by moving an operational part.The letter opener has an opening provided on a side face of a main body and a cutting blad...
|
|
JP3144310U |
To provide a safety cutter. A safety cutter has a blade piece and a pressure control rod that expands and contracts in a main body, has an elastic element in the main body, applies elasticity to the pressure control rod, and the pressure...
|
|
JP4084100B2 |
|
|
JP2008043599A |
To provide a cartridge type retractable knife, which is highly safe and prevents the blade body from being disengaged and falling off during use.The cartridge type retractable knife includes a grip 1 to form the outer shell of a retracta...
|
|
JP4046826B2 |
|
|
JP2007319202A |
To improve safety and prevent temptation to use as a dangerous weapon by preventing an excess protrusion of the blade of a cutter knife, and to achieve immediate storing in a holder with one action. The holder 1 has a blade protrusion st...
|
|
JP2007301309A |
To provide a retractable knife which improves work efficiency by eliminating shifting motion between the cutter and a pencil in hand. A retractable knife with pencil is provided with a mechanical pencil installing section at the back par...
|
|
JP2007252494A |
To provide a waste blade case with a blade breaking function, which is structured such that a blade breaking function for not scattering a waste blade when breaking off the blade tip of a knife blade is provided and the waste blade house...
|
|
JP3985055B2 |
|
|
JP3135660U |
To cope with an object or a case which is difficult to cut on a desk or a table, and to make it usable as a normal cutter knife. The sharpening of the blade of a cutter knife is a single-edged blade on one side, and the back surfaces of ...
|
|
JP3135703U |
To provide a two-flute cutter knife capable of cutting in parallel and accurately with a simple mechanism when using a cutter knife. Two cutter blades (1) of a cutter knife (3) are stacked, and a partition plate (2) is provided between t...
|
|
JP3979385B2 |
|
|
JP2007195734A |
To provide a cutter which prevents such a waste of resources as blunting of a blade body of a conventional sliding snap-off blade cutter is produced by slight wear of a blade edge and it is a big waste of resources to cut and throw the b...
|
|
JP2007151662A |
To provide a cutter having both sealing tape-peeling function for pipe threads and pencil sharpener function.The cutter includes: an upper cutter case 2 with a guide rail 6 attached at the end; a lower cutter case 3 attached to a connect...
|
|
JP2007144196A |
To provide a cutter which reduces manufacturing cost and increases diversity in usage.A housing anterior margin (15) which partitions a cutter blade outlet clearance (14) of a cutter housing (11) projects out in the range of a longitudin...
|
|
JP2007136117A |
To provide a one-handed kitchen knife which can perform both actions of pressing and cutting concurrently by the kitchen knife independently and can do the cutting work easily in one hand.A lever 4 which can be grasped together with a ha...
|
|
JP3131515U |
To provide a cutter knife which can hold a storage place and is convenient for reuse. A magnet rubber 3 is attached to a cutter knife 10. [Selection diagram] Fig. 1
|
|
JP2007117749A |
To provide a cutter having a cutter case which has improved operability.The cutter case (11) has an additional slitlike notch (17) in a cutter back (R) distant from a cutter edge (S) in addition to a notch on the sides (23 and 24) of the...
|
|
JP2007105439A |
To provide a cutter for a white hair, selecting only a specified hair such as a white hair or split hair and cutting it without cutting the healthy hair in the periphery of the specified hair such as a white hair or the split hair in the...
|
|
JP2007097802A |
To provide a cutter knife excellent in safety though in a simple mechanism.In the cutter knife 1 comprising a cutter blade 2, a holder 3 having a slide groove 30 to which the cutter blade is inserted so as to be moved back and forth, and...
|
|
JP2007068609A |
To provide a scraper capable of easily recovering the scraping capability.The snap-off blade scraper comprises a replaceable blade with a breaking groove previously formed on a band-shaped plate material and a breaker for breaking and ta...
|
|
JP2007050215A |
To provide a means for cutting only the first sheet without cutting the lower second and succeeding sheets while utilizing the merit of a cutter knife when the part of a target article is needed to be cut out from newspaper or magazines ...
|
|
JP2007037956A |
To provide a cutter knife for use in work cutting corrugated board, an adhesive tape, and the like.This cutter knife is so constituted as to extractably store a cutter blade in a holder constituting a handle and projects the tip of the b...
|
|
JP2007020820A |
To provide a cutter with a replaceable blade which facilitate blade replacement during work.The cutter with the replaceable blade has double blade having a left side plate and a right side plate, a tip interior separator 5 at the head po...
|
|
JP3869331B2 |
To provide a cutter knife of which a die-cast part is manufactured by a simple mold structure and of which the die-cast body is uniform in thickness. A sheath 4 is inserted into a first grip part 2 (A). A projection 3a to be retained of ...
|
|
JP3867275B2 |
To provide a replaceable blade type cutter knife capable of performing blade breaking work in the state of a blade breaking device being left mounted to a holder part to remove a used part from a blade body of the replaceable blade type ...
|
|
JP3127268U |
To provide a cutter in which a large number of cut blades are stored in a folding blade storage portion and can be appropriately collected and appropriately treated as dangerous dust. A folding blade cutter blade body 1 provided with a c...
|
|
JP3847612B2 |
To provide a folding knife in which the opening/closing operation and changing operation of a blade can be easily performed by one hand. Between first and second side plates 13 and 14 comprising a handle 12 of the folding knife 11, first...
|
|
JP3822332B2 |
To enable accurately washing of a grip as a whole while accurately washing the entire part of a blade body containing a core to be inserted into the grip. A blade body 10 is provided with a core following a sword blade 11 and the core is...
|
|
JP2006231017A |
To provide a foldable kitchen knife, after the use of the kitchen knife, being folded and stored with its edge covered therewith, for taking account of the safety.This foldable kitchen knife is characterized in that the handle of the kit...
|
