Document |
Document Title |
JP3812704B2 |
To provide a cutter knife number of parts and having a slider member which can be easily assembled. This slider member is composed of a slider main body member 8, an operating member 9 and a slider spring 10. Both the side edges of the s...
|
JP3812703B2 |
To provide a cutter knife capable of easily loading a cutter blade. Since a movable base 6 placing a cutter blade 5 is exposed in the state of drawing a cartridge 3, the cutter blade 5 can be housed so as to be dropped on this base. When...
|
JP2006174980A |
To provide a cutter for renewing a wiper blade capable of renewing the wiper blade having a smooth sliding face and surely wiping off dirt, without detaching it from a blade lever.This cutter 1 for renewing the wiper blade comprises a cu...
|
JP2006158558A |
To provide a cutter apparatus with which a sheet-like floor member can be cut off continuously and easily without deviation of a cutting position by avoiding jumping up of an end on the joint side of the floor member on a front side in a...
|
JP2006136395A |
To provide a cutter knife for a slush quilt by which the changing operation of various kinds of whole width member is easy which can be easily used and has long service life.A guide member holding base 30 extending to a user side making ...
|
JP2006116136A |
To provide a blade snapper for a cutter for easily carrying and performing breaking operation of a cutter edge.The blade snapper 1 for the cutter is provided with an attaching body 3 attached to an attached body 2 such as a belt, clothin...
|
JP2006116273A |
To provide a folding knife with a sheath which has a blade longer than a handle equipped with pulling-out tool.An opening part 9 is provided to one side face of the sheath 1. A folding knife 2 having a blade 10 longer than the handle 11 ...
|
JP2006110165A |
To provide a structure of a handle part of a manual cutlery reducing the cost by dispensing with a connecting rod for fastening a mouth ring to a handle part body, reducing the number of components and simplifying the structure.A rod-sha...
|
JP3120443U |
To provide a slide type cutter capable of improving safety at the time of use, enabling use at a blade tip portion, and further efficiently using a cutter blade. When breaking a cutter blade 2, the cutter blade 2 is broken from a locking...
|
JP2006075547A |
To easily and neatly separate meat portions of a cooked fish from its bones.A blade part is out of alignment with a handle part as shown in the figure, and the knife blade is thick and curved in cross section like 11 in the figure.
|
JP3754434B2 |
|
JP2006042917A |
To provide a foldable knife which can be easily attached and detached to/from a belt loop or the like.On the side plate 22 of a handle 21, a blade 24 and a back metal 29 are turnably supported. By the hooking part 37 of the fixing member...
|
JP2006042918A |
To provide a knife in a simple structure for which a manufacture cost is reduced, assembly is easily performed and respective blade bodies are easily released from a lock state.The plurality of blade bodies 19, 20, 21 and 22 are disposed...
|
JP2006043437A |
To provide a foldable knife in which a blade holder can easily be folded into a handle with a complex structure and which is easily used and manufacture and maintenance can be performed at low cost.A lock assembly 15 on a handle 2 includ...
|
JP2005342118A |
To readily break a blade body, prevent the broken piece from scattering, and accurately storing the broken piece.A case A having a housing groove 1a for slidably housing a strip-shaped blade body is composed by detachably connecting a fi...
|
JP2005324026A |
To provide a foldable utility knife in which a blade may be easily folded into a handle, the blade is held securely, improved means are provided for replacing the blade, and which is simple to use and inexpensive to manufacture and maint...
|
JP3716261B2 |
To provide a safety snap-off blade cutter where only a blade edge is positioned outside the housing of the safety snap-off blade cutter at the start of cutting and a guard member jumps out from the inside of a housing just after finish o...
|
JP3716399B2 |
To provide a cutter knife which can be locked automatically in steps by preventing a leaf spring from being non-usably deformed. A holder 1 has an engaging recess part 1b formed in the shape of an equal-legged trapezoid in its upper surf...
|
JP2005312848A |
To provide a seal opening implement to solve an inconvenient, inefficient, uneconomical problem that separate implements are used for each purpose such as scissors and a knife needed for opening envelopes, the scissors and a cutter neede...
|
JP2005305160A |
To provide a folding knife, the blade of which can be locked and unlocked by a simple mechanism.The folding knife 20 has a handle 24 having a locking surface, a blade 22 connected to the handle and rotating between a closing position and...
|
JP2005278807A |
To provide a cutter which cuts and opens only a packaging film covering a packaging case without damaging the packaging case.A slit 18 is provided on a guiding surface 17 on the outer side surface of a casing 1. A cutting blade 27 attach...
|
JP2005261944A |
To provide a collapsible utility knife capable of easily folding up a blade in a handle, capable of firmly holding the blade, easy in its replacement, easy in use, and requiring no high cost for manufacture and maintenance.This utility k...
|
JP2005253937A |
To provide a safe snap-off blade cutter, which is safe and easy to use.The renewable blade of a safe snap-off blade cutter can be exchanged by snapping off its tip section therefrom on a line meeting its edge at an obtuse angle to make i...
|
JP2005185800A |
To provide a pocket knife, opened and closed one-handed without pressing the end of a back metal and without touching a blade body and the back metal in the pocket knife constructed so that the back metal is rotatably fitted to the backs...
|
JP2005177014A |
To provide a knife allowing heat sterilization in a short period of time, preventing breakage of a handle part even if repeatedly performing the heat sterilization and improving the durability.The base of a blade part 11 is integrally co...
|
JP2005111220A |
To provide a spring for a minimal folding knife which is constituted that a moving part of the spring does not touch a side plate when a blade of the minimal folding knife is set up and stowed away and enables a back metal, the spring an...
|
JP2005103223A |
To provide a colorful and safe kitchen knife with which exchange is performed into a replaceable blade when the blade of a kitchen knife body becomes dull and the replaceable blade is folded so as to store its point in a handle part for ...
|
JP3639990B2 |
|
JP2005087669A |
To provide a manual paper cutter whereby straight line cutting can be performed with only a straight ruler, leaving no cutting damage on a desk surface, even when no cutting board is used.This manual paper cutter is provided with guides ...
|
JP3619993B2 |
A cutter cassette includes a cutter case for holding a cutting blade slidably in a case holder. The cutter cassette further includes a holding mechanism for holding the cutter case in a completely inserted state and an extending mechanis...
|
JP3611391B2 |
|
JP3605546B2 |
|
JP2004351189A |
To provide a snap-off blade cutter/knife which gives consideration to dangerousness on snapping off a blade tip, seriousness of snapping off the blade tip and treatment of the snapped off blade tip by eliminating the problem of serious d...
|
JP3600671B2 |
|
JP2004337610A |
To provide a foldable utility knife easily folding a blade into a handle, firmly holding the blade, facilitating its replacement, being simply used, and dispensing with a high cost for the manufacture and maintenance.This utility knife 1...
|
JP2004337612A |
To provide a foldable utility knife easily folding a blade into a handle, firmly holding the blade, facilitating its replacement, being simply used, and dispensing with a high cost for the manufacture and maintenance.This utility knife 1...
|
JP2004329424A |
To provide a sheet cutter capable of easily coping with defective cutting of an edge by adopting a cutter-knife type edge and capable of cutting an interior sheet material such as a floor material and wall paper without damaging the floo...
|
JP2004321760A |
To provide a highly safe cutter which is prevented from falling off and being left behind.A reel wire is attached to the backside of a cutter main body A to prevent the cutter from falling off and from being left behind. Furthermore, the...
|
JP2004305531A |
To provide a snap-off blade knife allowing a user to snap off a used razor blade, store it in a storage chamber and dispose them together.A tail plug 20 provided with the storage chamber 26 storing the used razor blades 14b is detachably...
|
JP2004298602A |
To simply snap off a blade tip without using a clip or nippers, and to batch housing the used and snapped off blade tips for batch scrapping them.(a) Joint parts (6) are formed on the front side of a main body (1) having rails (4) formed...
|
JP3581417B2 |
|
JP3581614B2 |
|
JP2004237440A |
To prevent inaccurate motions or abrasion generated by moving a tool slide.A linear movement-supporting utensil 10 is particularly combined with a cutting group 12 of a machine tool for continuously cutting laminar materials such as a fi...
|
JP2004237040A |
To provide a folding knife which can be safely opened and is increased in durability by preventing a back metal spring part from damage.In this folding knife, an shaft pin 3 of the supporting point is placed at the rear side from that of...
|
JP3548861B2 |
To provide a folding manual sharp-edged tool with simple constitution, which enables a user to house/extract the acting part such as a blade part, etc., into/from a handle by small power with moderate feeling and, further, can be simply ...
|
JP2004202162A |
To solve problems that the conventional handy cutter knife to be used for cutting paper or the like is instable and highly dangerous, there is danger that a hand pressing the object to be cut is injured, a blade is easily broken to stick...
|
JP3529136B2 |
The blade of a folding knife is pivoted on a D-shaped pivot axle which also serves to lock the side pieces and belt clip of the knife in place. A thumb pin used to open the blade is also D-shaped and press fit into place in the blade. Th...
|
JP2004141251A |
To provide a snap-off blade cutter precisely performing cutting work in a place where no lighting facilities are provided.The snap-off blade cutter 1 is provided with a blade 2 having an edge part 2a and an edge tip part 2b and cutting a...
|
JP3527597B2 |
To provide a cutter knife whose edge can be automatically locked step by step only by means of two members, a slider main body and an operational member. A slider comprises a slider main body part 2 and an operational member 3. An engagi...
|
JP3523415B2 |
To produce a ferrous alloy member composed of a base material of an Fe-Cr base stainless steel and an Al-Fe diffused layer provided on the base material and having high hardness and wear resistance. This ferrous alloy member is composed ...
|