Document |
Document Title |
JP2000357251A |
To obtain an article management system which manages articles for a long time by using tags to manage articles in an office or a home.Radio waves of tag information transmitted from tag units 181 to 18n given to articles to be managed ar...
|
JP2000233808A |
To accurately comprehend the situation of physical distribution on a real time basis. A traceability data is written by radio on a non contact single chip equipped on a tracking function mounted package wrapping an article. The traceabil...
|
JP2000187713A |
To improve the recovery rate of carrying tools to be recycled and to reduce the cost of recycling. The recycling method is provided with a shipping processing step 22 for reading out the inherent number of a carrying tool to which an IC ...
|
JP2000168907A |
To control the treating process and term until the final disposal of waste and prevent an unlawful throw by a discharger by sending a first control tag so that the second control tag delivered by a treater can be confirmed, when the trea...
|
JP2000168908A |
To control the treating process and term until the final disposal of waste and prevent an unlawful throw by a discharger by sending a first control tag so that the second control tag delivered by a treater can be confirmed accurately, wh...
|
JP3051861B2 |
PURPOSE: To transmit data properly to a plurality of responding equipment existing within a communication region. CONSTITUTION: A start signal is output from a transmission antenna 22 of an interrogator 10 and then returning timing is ra...
|
JP3045387B2 |
To perform safety control by arranging a plurality of infrared readers in passages in a tunnel, to attach identification tags to workers, equipment, and materials, to detect them by the infrared readers, and to express them on displays. ...
|
JP3033924B2 |
PURPOSE: To smoothly advance transaction processes on the electronic cash register. CONSTITUTION: A customer quantity counter 6 and a lamp 7 are installed in the ECR 1 and they are connected by signal lines and controlled by a CPU 8. Mem...
|
JP3033522B2 |
To firmly prevent the forgery, and to enhance the safety, by making a maker give a ciphered character string to a commodity and making the makes confirm a normal purchaser when the character string notified by the purchaser is an identif...
|
JP2000090314A |
To provide an automatic machine remote monitoring system capable of efficiently operating plural automatic machines and saving the manpower of employees, an automatic machine remote monitoring table used for the system and the automatic ...
|
JP2000067290A |
To facilitate management and to easily and speedily identify identity concerning a method and a device for identifying identity to be used for identifying the identity at a bank or public office, for example. Concerning this identity ide...
|
JP3010119B2 |
It is known that detection labels and reading devices are used for the contactless identification of people or objects. If the detection label is brought into the vicinity of the reading device (12), the latter can receive and evaluate t...
|
JP2000020781A |
To instantaneously obtain an identified result even when plural desired partners are selected without confirming whether or not the other party recognizes the participant himself or herself as a partner by selecting and inputting the num...
|
JP2997213B2 |
|
JPH11339085A |
To provide a book return device which lightens the burden on an operator by improving operation efficiency needed to return books by enabling users to easily follow a return procedure for a book and perform operation needed for sorting. ...
|
JPH11327961A |
To offload a microcontroller from many functions and to turn the microcontroller into an inoperable state as much as possible for saving the power by a control circuit. Function signals are supplied to this control circuit 2 and the func...
|
JP2969426B2 |
PURPOSE: To easily machine resonance labels with high response sensitivity in quantities at low cost. CONSTITUTION: Aluminum foil 1 is adhered to a polyester table (base) 2 with a repeelable adhesive 3. Then a polyethylene thin film 4 as...
|
JP2967677B2 |
PURPOSE:To improve the efficiency of collection and delivery of door-to-door delivery cargoes in a door-to-door delivery system for retail sale by collecting and controlling information about acceptance and collection of the cargoes by e...
|
JPH11274925A |
To provide a signal arithmetic unit that detects the fault of an input signal processing circuit, while keeping reception of an input from a signal source. An input signal processing circuit 12 processes an input signal from an external ...
|
JP2957501B2 |
To rapidly estimate a repair cost by capturing image data of accident vehicle by a digital camera, deciding and sorting damage sites, and calculating to estimate it. The accident vehicle repair cost estimating system comprises, for examp...
|
JP2948467B2 |
PURPOSE: To provide the vehicle detector not to be affected by traveling forms, such as high-speed, translation, weather conditions and surrounding shadows by averaging concentration signals converted to digital signals in terms of the p...
|
JP2948756B2 |
To group-control the housing work of many document by each file box by radio through the use of a personal computer. This system consists of plural file boxes 1 housing plural documents 2 to which bar code labels 12 printing bar codes 11...
|
JP2948253B2 |
A transmission controller operates one of the terminals selectively to use the speech communicator and to operate a digital imput. A status arrangement selectively identifies an incoming response from each chosen terminal as digital cont...
|
JP2911336B2 |
|
JPH11144112A |
To easily order beverage and the like and to accurately transmit an order to a receiver side. A transmitter 2 inputs order objects and the number of order articles by depressing a beverage selection key 6 and quantity selection key 7, re...
|
JPH11134409A |
To provide a history information retrieving method for efficiently retrieving history information, and for displaying the information to allow a retriever to easily analyze the information, as well as to provide a history information ret...
|
JPH11102453A |
To prevent a case in which the heat insulating flon is not collected and the chlorofluorocarbon gas is radiated into the air by deciding the treating charge, in response to the quantity of collected heat insulating chlorofluorocarbon. A ...
|
JP2861633B2 |
|
JP2854102B2 |
A new code-protected car radio is described in which the protection code memory is cleared when a second code is entered.
|
JP2839535B2 |
|
JP2836067B2 |
|
JP2825473B2 |
To obtain an estimation system by which repair charges for a vehicle can be estimated precisely, objectively, quickly and easily by a method wherein a damaged part and a damaged degree are specified by referring to image data on an accid...
|
JP2818716B2 |
PURPOSE: To sensitize a target of an electronic surveillance system by rotating a permanent magnet attached to a carrier. CONSTITUTION: A magnet carrier 40 is rotated with a motor 36 while a permanent magnet 48 is rotated around an axis ...
|
JPH10273209A |
To provide a management card for warehouse and a warehouse management which can easily rewrite its storing data without erasing the stored data unconsciously touching an entry section. A card body 14 with an entry section 17 and a transp...
|
JP2806735B2 |
|
JPH10222737A |
To prevent unnecessary power consumption by interrupting alternating current power supply that is externally supplied to each device of an automatic vending machine when sales is suspended. An article sold out detecting part 12 detects t...
|
JPH10188170A |
To speedily grasp the conditions of damage caused by earthquake occurrence and initial preparations by finding the degree of damage by detecting the signal of physical change caused by an earthquake for each block, and outputting damage ...
|
JPH10187821A |
To reduce a storage space of packing parts by progressing a banning plan in terms of time and making a packing plan in consideration of the time that is needed to a packing line for the ordering and then the delivery of the packing parts...
|
JP2768628B2 |
PURPOSE: To solve disadvantages that an electric driving device is required, an installation place is limited and a device can not be adopted since a scale is too large as the device just for distributing order tickets, etc., even though...
|
JP2763037B2 |
A number of items present in a substantially linear queue are counted by examining two images of a scene including the queue that are taken from vantage points offset relative to each other. Depth information for portions of the scene is...
|
JPH10149470A |
To provide method/device for order-receiving/issuing and collecting/ delivering the products of perishable foods, which can securely obtain the required quantity of required products and can securely purchase them. The identification cod...
|
JP2745334B2 |
|
JPH10105613A |
To surely inform a driver and collector/deliverer of an accurate collection/delivery instruction in real time any time and to enable the request side to surely confirm that the driver and collector/deliverer has been informed of the chan...
|
JPH1097633A |
To detect the inner part of a selected area and the pattern of the movement of a man around it by positioning a video camera, sequentially acquiring pictures at a prescribed interval, storing them in a memory and generating a prescribed ...
|
JP2735254B2 |
|
JPH106846A |
To provide a remote monitoring method for prescribed information on a cargo and a vehicle wherein the internal environment temperatures of a number of vehicles and containers regarding a generator and a stationary base to temporarily sto...
|
JPH09330453A |
To eliminate troublesomeness at the time of managing and using by abolishing a card and to improve security by eliminating unexpected disadvantage caused by the loosing, the theft, the forgery, etc., of the card. A credit member or a pin...
|
JPH09288752A |
To provide a chain shop information management system capable of managing the attendance of employees working at chain shops altogether in a head office. A timer recorder 72 provided with a card reader 84 is provided, the time recorder 7...
|
JP2664972B2 |
PCT No. PCT/LK88/00002 Sec. 371 Date Jun. 4, 1990 Sec. 102(e) Date Jun. 4, 1990 PCT Filed Aug. 16, 1988 PCT Pub. No. WO89/03100 PCT Pub. Date Apr. 6, 1989.A personal identification system wherein an encoded version of the user's fingerpr...
|
JPH09268814A |
To provide a locking control system in which a person who leaves a store last can surely perform the locking before coming home, no-locking can be prevented to effectively prevent crimes, and freedom of care on the control can be improve...
|