| Document |
Document Title |
|
JP3694509B2 |
To provide a tire for a riding golf cart attached with a grounding pad damaging no lawn of a fairway or for a golf course management vehicle. A base plate 7 provided with fitting projections 6 closely fitted and fixed to a large number o...
|
|
JP2005238906A |
To provide a rubber pad replacement type tire chain capable of being fitted without requiring time and labor, replacing parts corresponding to a snow accumulation condition or damage, being carried or stored without a problem owing to it...
|
|
JP3675962B2 |
To give a constantly uniform tightening force to each of non-slip device body to be fitted to tires on the right and left sides in the traveling direction of a vehicle. In a tightening tool 10 in which a return part 23 of a tightening ba...
|
|
JP2005193744A |
To provide a tire slip preventive tool, having a spike pin made from temperature sensing rubber hardening under a low temperature, and easily attached/detached to/from a tire surface if necessary.In the non-metallic tire slip preventive ...
|
|
JP2005193765A |
To provide a tightening tool for a tire anti-skid device capable of reliably tightening tightening-ends of the tire anti-skid device by a simple operation.In the tightening tool for the tire anti-skid device, a base part of a band member...
|
|
JP2005178714A |
To provide a set chain allowing easy mounting in a short time.A number of touch chains 2 are formed by bending steel wires into hoops, which are connected together to generate a certain length, and thin and long steel wires in several pi...
|
|
JP2005170097A |
To provide a antiskid tool for a tire not causing the erroneous installation of the front and the back of the tool even in installing it on the tire at a place with little lighting at night, etc.The front side and the back side of a non-...
|
|
JP3665939B2 |
To make even a forceless woman or an old man able to easily and surelyfasten an antislip device for automobile tires. For a plurality of net-shaped body which forms an antislip body, the first and second flexible protruding pieces 16, 17...
|
|
JP2005153744A |
To easily and surely connect both ends of an internal fastening cord of a tire slip preventing device, to increase the durability, and to reduce the manufacturing cost.This internal connector 2 for the tire slip preventing device 1 is pr...
|
|
JP2005145387A |
To prevent damages on a wheel and degradation of a lock-engaging force by the abrasion of a slidably contact portion by making the slidably contact portion of a main body of hook body formed of a non-coating part, and by making other por...
|
|
JP2005138666A |
To provide a slip-prevention tool for a tire, capable of being attached to a vehicle having a narrow clearance around an underbody, and suppressing the occurrence of deviation of a net, even if a net body is composed of a divided type.In...
|
|
JP2005138821A |
To provide a module type tire chain structure and system having versatility for use in a winter running product assuring a repair possibility and interchangeability of constituent elements without using any tool and accepting particular ...
|
|
JP3652850B2 |
To prevent the rope-shaped member such as a tightening rope arranged inside or outside a tire from being brought into contact with the rim flange or the like of the tire wheel, so that the damage thereof can be prevented. In a belt-shape...
|
|
JP2005119575A |
To easily change a use/non-use state of a tire anti-skid device, and to improve the ride quality when the anti-skid of a vehicle is operated.An annular tube 3 is stored inside an annular holder 2 mounted on a tire wheel 7, and a large nu...
|
|
JP3647484B2 |
PURPOSE: To improve the press bonding state of both upper and lower molding materials crossing each other when the respective crossing parts formed by knitting the molding materials of a nonskid main body into a reticulated shape are pre...
|
|
JP3642851B2 |
To restrain a tightener, which is engaged with the outer side hook of an anti-skidding body, from being worn by the frictional movement of a side rope. The side rope 12 of a tightener 10 is impregnated with silicone. For impregnation wit...
|
|
JP2005104268A |
To provide a new tire chain for an automobile easy to install on a tire and devised to maintain stable installed state by following deflection of the tire.An antislipping part 2 is formed by dividing the tire chain 1 for the automobile i...
|
|
JP2005088800A |
To provide a bad road get-out assisting tool for a self-mobile vehicle such as an automobile, allowing it to get out quickly from a bad road with surface unevenness, soft surface, sand, snowy and icy surface, etc. with a simple construct...
|
|
JP3627035B2 |
|
|
JP3614542B2 |
To improve the endurance of antiskidding body fitted into a tire at the time of cornering of a vehicle. A spike pin 22 at the side end in the width direction of an antiskidding body 20 is disposed at a position corresponding to a range o...
|
|
JP3612016B2 |
|
|
JP2005001568A |
To provide a non-skid tool for a tire which allows easy mountability on the tire and cost reduction, and is improved in appearance when the tool is mounted on the tire.The non-skid tool for the tire has a metal non-skid tool body 2 divid...
|
|
JP3608031B2 |
|
|
JP3599067B2 |
To provide a tightening tool having a proper tighening force for restraining the eccentricity of a anti-skid main body at the vehicular running time without impairing the easy mounting of the tire with a tire anti-skid device. In a tight...
|
|
JP2004330897A |
To provide a tire nonslip chain simple to install on a chain without looseness and capable of providing a certain nonslip effect by arranging each of cross chains so as to straddle over a tread surface of the tire at right angles.This no...
|
|
JP2004299460A |
To provide a non-slip tool for a tire whereby the tire can be easily attached, and inconvenience in terms of handleability and costs can be prevented.This non-slip tool for the tire is provided with a nonmetallic non-slip tool body 2 div...
|
|
JP2004299458A |
To provide a band-fastening tool whereby predetermined tension can easily and rapidly act on an expandable band along the longitudinal direction, and a non-slip tool for a tire equipped with the band-fastening tool.This band-fastening to...
|
|
JP3579033B2 |
|
|
JP2004276155A |
To provide an auxiliary member for mounting a tire non-skid device, which facilitates mounting work of the tire non-skid device, and is manufactured at a reduced cost.The auxiliary member is formed of an engaging portion 32 to be disenga...
|
|
JP2004276688A |
To further promote reduction of cost and to easily mount an antiskid tool for a tire on the tire.This tool has a non-mental antiskid tool main body 2 capable of winding around an outer periphery of the tire. This antiskid tool main body ...
|
|
JP2004268892A |
To provide a facilitated snow chain usable for both a double tire and a single tire and allowing easy detachment/attachment operations and a protective pad.A wire passed through the ends of the chain cut to a tire width is passed through...
|
|
JP2004262419A |
To provide a rubber chain which can be used as a substitute for a usual chain for a vehicle tire and whose length can be adjusted freely.The rubber to be wound round the tire is fitted with many brushes, which suck off the water as the c...
|
|
JP3563794B2 |
PURPOSE: To enable a car run on such undrivable icy and snow-clad road surface even in a studless tire, and to reduce a noise as well as to improve driving quality. CONSTITUTION: A spike pin 9 being projected out of a tread surface is em...
|
|
JP3557464B2 |
A slip-preventing device of a tire has a plurality of arm frames each of which is contacted with an inner sidewall, a tread and an outer sidewall of the tire. The arm frame has a link unit at a side of the outer sidewall of the tire. The...
|
|
JP2004210184A |
To provide a tire non-skid device capable of facilitating a fixing work of an automobile, preventing a tire from slipping in the vertical, longitudinal or right-to-left direction without damaging the tire.The tire non-skid device compris...
|
|
JP3546418B2 |
To provide a slip prevention device for a tire allowing any person to mount it on the tire and dismount it from the tire simply in a short time. This slip prevention device for the tire is constituted in such a way that a pedestal is pro...
|
|
JP2004203174A |
To provide a tire racing preventive mechanism which is easily fitted even when a car encounters any case such as snowy and muddy roads.A winding mechanism of a towing rope 15 or the like is fixed to an outer surface of a tire wheel, and ...
|
|
JP2004196274A |
To easily join the side plates of a set chain to each other to easily install, in a short time, the set chain used, as a slip preventer, on the tire of a car in stoppage and to form the side plate joint part, after the joining, to be nev...
|
|
JP2004148874A |
To further cut the cost of a tire antiskid device and facilitate the attaching of it on a tire.The device comprises a belt-like antiskid body 2, which can be wound around the outer circumference of a tire and has a plurality of net const...
|
|
JP2004142692A |
To solve problems of a conventional anti-skid device of metallic chain type for a two-wheeled vehicle wherein steering stability is bad, a sideslip is likely to occur when tilting for turn, thereby causing danger, it is difficult to let ...
|
|
JP2004142680A |
To provide a manufacturing method for a tire anti-skid device enabling secure prevention of exposure of a core material in a hooking part of the tire anti-skid device and secure prevention of early breakage of a tire anti-skid device mai...
|
|
JP3526827B2 |
An anti-skid device has rotating chains which are connected to an inner and an outer fixing device. The outer fixing device is formed from a ring-shaped disc (10) and a retainer ring (11). The retainer ring is provided for the end of a t...
|
|
JP3527136B2 |
To enable easy installation of a chain to a tire even for a non-skilled person. This tire chain comprises the following: a body portion which wraps around a tire 2000; a plurality of frames with protruded at the center, while embedded in...
|
|
JP2004136791A |
To provide a non-slip implement for a tire using a cord net-type non-slip implement body, which can easily be attached to the tire and eliminate inconvenience in terms of handleability and costs.This non-slip implement for a tire is equi...
|
|
JP2004122964A |
To provide a tire chain for a heavy vehicle which enables mounting work very easily without moving a vehicle, prevents the tire chain from removing from a tire even when a part of the tire chain is cut off during use, enables to repair a...
|
|
JP2004122951A |
To facilitate mounting to a tire and prevent generation of inconvenient in handling property and cost or the like in an antiskid implement for a tire.The antiskid implement for a tire has a band-shaped, nonmetallic, antiskid implement bo...
|
|
JP3517615B2 |
To facilitate the mounting on vehicle tires of different sized by holding a plate or ring support element on a rotating bearing part by a grip. A grip element support 50 arranged on a support element 10 formed as an annular body radially...
|
|
JP2004074946A |
To provide a slip stopper for a wheel having a simple structure, applicable not only to a small-size vehicle but also to a large-size vehicle, having a good attaching/detaching workability to a wheel, consuming no material having economi...
|
|
JP2004075032A |
To easily fit a set chain to a tire of a parked car using a connection piece by temporarily fixing a conventional easily foldable set chain to a guide.A pair of guides 1 and 1 formed by bending slender steel plates in a semi-circular sha...
|
|
JP2004502580A |
Year-round towing tire stud systems have leak-proof transmission means, such as metal wires, that allow studs to be placed in and out of stud holes on the tire shoulder. This means can also be moved on the tire side surface outside the t...
|
