| Document |
Document Title |
|
JP2002199536A |
To devise an exclusive jig to comparatively easily remove a part of a UV resin sheathing which covers a tensile strength integrating layer of a tight cord as is rather elastic, and to devise the jig to easily lead the end of an optical f...
|
|
JP2002199535A |
To provide a wire stripper with an extremely simple structure with which various kinds of wire sheathings can simply, easily and quickly be eliminated.An elastic metal plate is bent in a U shape and is made into a wire stripper. The wire...
|
|
JP2002178695A |
To provide a tool for opening a sealed letter which makes the folding crest of the letter inserted into a clearance contact a blade edge correctly irrespective of the thickness, etc., of the letter and can open the inserted letter exactl...
|
|
JP2002177671A |
To provide a cutter capable of pinching by a V-shaped plate (1) and an inverted V-shaped plate (2) so that a rotatable circular blade (3) may incline, making the internal angle 90 degrees, fixing the rotatable circular blade (3) at 45 de...
|
|
JP3288676B2 |
To provide a method and an apparatus for terminal treatment of a coaxial cable, capable of treating even the terminal of an extra fine coaxial cable at a high speed and with precision. The terminal of the coaxial cable 1 is stripped usin...
|
|
JP2002160113A |
To provide a drill blade allowing anyone to easily and certainly cut an aluminum layer and an expanded polystyrene layer, intermediate cover, for covering a coaxial cable.This drill blade 10 is used for a drill for cutting and removing a...
|
|
JP2002159113A |
To provide a jig for removing cable covered section capable of completely notching the whole periphery of the covered section of a cable with non-circular cross section form without damaging any other part than the covered section.This j...
|
|
JP2002144285A |
To simplify the recycling of PET bottles by solving problems in break ing, separating and reproducing the PET bottles caused by the facts that a structure of the PET bottle has both of a soft part and a hard part, a pour spout part has a...
|
|
JP3284461B2 |
To easily open an envelope by mounting an upper cutting edge and a lower cutting edge on the deep insert port of a substantially U-shaped opener body in such a manner as to provide a clearance part between both cutting parts and cross ea...
|
|
JP2002136781A |
To provide a cutup device for a metal wire with a coating material for automatically and easily cutting up the coating material coating the periphery of the metal wire and turning it to a form to be easily recovered and recycled.This dev...
|
|
JP2002126378A |
To provide a scraper reducing attachment of foreign matter to a fused part of a resin pipe, enabling stable fusion connection and improving the efficiency of piping installation work in piping installation work using an electric fusion j...
|
|
JP2002119779A |
To provide a compact outer layer cover remover of a double-layered tube capable of efficiently removing a cover and economically maintaining excellent cuttability.In this outer layer cover remover, a pair of semi-cylindrical holding memb...
|
|
JP2002109980A |
To provide a separation tool for separating metal wire from its covering which draws out a metal wire, separates it from a covering, makes it to take a form of easy to collect and reuse, and prevents and environmental pollution.For a too...
|
|
JP2002107547A |
To provide an apparatus for automatically peeling an optical fiber in a constant length, which accurately peels the outer sheaths of optical fibers having various diameters, does not cause damage to a glass core, and improves the speed a...
|
|
JP2002101515A |
To allow an easy and quick retooling of a braided-shield cutting device used for terminal processing of a shielded cable in line with a size change of the cable for being processed.A package replacement of a cylindrical external blade 22...
|
|
JP2002087416A |
To provide a novel and improved cutting tool capable of cutting or separating a plastic strapping.This manual cutting tool for cutting the plastic strapping has a housing comprising a basic part, an upright web and a rib member. A slot i...
|
|
JP2002066173A |
To provide a knife guide for cutting a paper pack container, which enables a user to easily and accurately cut a paper pack container as several times fast as a conventional method.When a paper pack container is cut into a prescribed sha...
|
|
JP2002064916A |
To provide a cable insulator stripper capable of stripping the insulator of a cable without damaging a core wire in a cable, and taking out a tearing string efficiently and completely.In this cable insulator stripper 1, an insulator is s...
|
|
JP3259859B2 |
PURPOSE: To simplify handling of a knife and especially to prevent the damage of a vehicle body when cutting off a glass pane from an automobile. CONSTITUTION: A cutting part 16 can be coupled through a fixed opening part to an oscillati...
|
|
JP2002058124A |
To provide a special purpose tool with which wires can be cut completely and the cut ends can simultaneously be processed.At the position corresponding to a complete cut insertion hole 20 of each of meeting and parting members 12, 12 sto...
|
|
JP2002058123A |
To provide a cable sheath stripping tool, with which a sheath stripping work can easily be performed by rotating the tool with a lever gripped, so that a cutter can bite into the sheath.The tool adopts a constitution which consists of fr...
|
|
JP2001352634A |
To provide a stripping tool which can easily strip a sheathed cable with a shaped cross-section.This stripping tool has a fixing holder 3, which holes a sheathed cable and a rotary holder 4 placed immediately behind the fixing holder 3 a...
|
|
JP2001330736A |
To provide a coating removing device capable of efficiently removing a coating in the outside of an area except an object to be cut even in an optical fiber wherein the areas except the object to be cut of a bare fiber or the like exist ...
|
|
JP2001330735A |
To solve the problem that labor and time are required for positioning cutters although the cutters having a recessed part at the tip end of a blade are adopted in order to avoid cutting of the area of the cross section central part of an...
|
|
JP2001327025A |
To provide a cutting tool for the external semiconducting layer of a cable, by which the cutting and removing operation of the external semiconductive layer of the cable is performed easily, and by which only the external semiconductive ...
|
|
JP2001311831A |
To provide an optical fiber coat removing device capable of easily removing all scraps of a coat after removing the coat.A discharge groove 12c being a guide line which discharges removed scraps k of the coat outside is formed in the vic...
|
|
JP2001300160A |
To provide a cutter which is capable of easily cutting the covering of a corrugated tube, enhances safety so as to prohibit the cut of the hands and is usable by not only a right-handed person but a left-handed person as well. The cutter...
|
|
JP2001298818A |
To provide a connecting clamp which is light, and excellent in labor saving, safety, disburdening workers and standardization, at a connecting spot of a covered electric wire. This connecting clamp 1 is provided for cutting off the cover...
|
|
JP2001298822A |
To provide a covered electric wire stripper of simple construction which makes it possible for everyone to strip off the covering of a covered electric wire easily over a specified length even at a narrow spot without using a cutting too...
|
|
JP2001293268A |
To provide a cutter for unsealing a paper pack such as for milk. This paper pack cutter is provided with a part held by hand like an eyeleteer, and a metal fitting (tip is pointed sharply) mounted on the forward end thereof, a part of th...
|
|
JP2001292515A |
To save labor and time for re-tooling which are involved when changing a cable type by automatically setting the cutting amount of a stripping blade in the terminal processing of an electric cable, thereby performed several types of proc...
|
|
JP2001268740A |
To provide a rechargeable cable sheath stripper which strips off the coatings of electric wires having complicated construction, coatings such as the insulators (crosslinked polyethylene insulation), and sheaths (vinyl sheaths) of variou...
|
|
JP2001246185A |
To provide a cutting tool for a coating part of wire, which can easily form a slit along the longitudinal direction of the coating part of wire.A through hole 2 into which a wire 24 can be inserted and a groove part 3 with almost U-shape...
|
|
JP2001238320A |
To make a circumference cut correctly and easily on the outside of a coated wire.This cutter is structured with the first and second cutters 1, 5, that are rotatable into a state that the coated wire 9 is supported with a hinge 7 as a fu...
|
|
JP2001204980A |
To obtain a pressing and winding cutter which can eliminate a danger to damage an optical cable inside and which is excellent in workability. Since the pressing and winding cutter 1 has a spring load clip structure formed of a cutter sup...
|
|
JP2001198368A |
To provide a low-cost, light-weight and handy cutter to open easily and sharply a number of sealed matters. The cutter to open document and plastic bag is characterized by overlapping two flat panels 11 and 12, inserting a blade 6 and fi...
|
|
JP2001169427A |
To develop a member cutting apparatus which can accurately process a covering material at the connecting end to a conic shape while keeping a high voltage cable in the stationary condition.This member cutting apparatus is composed of a c...
|
|
JP2001120862A |
To provide a cord cutter capable of easily taking out and cutting a cord and a case for the cord with this cutter used. A rubber 2 as an elastic body is set on the edge 41 of a hole 5 opened in a case 4 for a cord, and a cord stopper 1 i...
|
|
JP2001120861A |
To provide a convenient bag-opening cutter capable of adeptly opening a food bag or retort pack or a pack vessel. This bag-opening cutter 1 is formed a body 2 having a cutter blade 4 mounted at the tip and a U-shaped cross-sectional cove...
|
|
JP2001091751A |
To provide a tool for separating a single core of a tape fiber and its separating method by which a multiple cored tape fiber is easily sheared/ finely split and by which a tape covering layer can be removed after the separation. The too...
|
|
JP2001087575A |
To provide a cutter for safely cutting a plastic screw part fitted to a glass bottle and uneasy to be cut because of round-shape, hardness and short size thereof. The blade 1 part of a cutter is surrounded by a triangle frame 2.
|
|
JP2001079282A |
To easily cut and disassemble a paper pack with a simple structure by providing a cylindrical or U-shaped guide structure conformed to the outer shape of a square pole-like paper pack vessel such as milk pack, and providing a paper pack ...
|
|
JP2001072339A |
To provide a method for performing ending for a tail thread safely, with good operability and easily, and to recycle a paper tube by cutting a tail thread without damaging the paper tube. According to this tail thread ending method, a wi...
|
|
JP2001062162A |
To make a cutting device extremely easily, speedily, and beautifully cuttable various objects to be cut such as sheets or cords of ordinary paper, thick paper, cloth, hard or soft plastic, without specially requiring a technique. This cu...
|
|
JP2001000760A |
To exfoliate sheathing materials easily without damaging inside cable conductors and to prevent inside copper wires and optical fibers from breaking in an easy and inexpensive slit-working jig with a regulating function for cable sheaths...
|
|
JP3122042B2 |
To provide a cutter in which a side wall of a corrugated board case can be cut by anyone without damaging contents in the corrugated board case. On a main body 1 comprising a plate body of a constant thickness having a flat front surface...
|
|
JP2001000759A |
To facilitate the fitting on a string which is pulled out from a string wound ball, and at the same time, facilitate the cutting of the string by providing a recess at one section on the outer periphery of a properly flat-shaped plate pi...
|
|
JP2000354692A |
To provide a method for manufacturing ALC panels with smooth- surface panels.In a cutting process to cut an ALC half-hardened body with a piano wire, the ALC half-hardened body during cutting is of a hardness in which a depression of a d...
|
|
JP2000350324A |
To strip a covering part off properly and perform twisting for a core part whose covering part has been stripped off to be exposed by an easy means.This stripping device is provided with a cutter whose facing blade points approach or sep...
|
|
JP2000334186A |
To efficiently peel and remove a film of a cathode ray tube with small force.This tool is provided with a slit 6 to be inserted with the end of the film on the outer periphery of a take-up part 3 in such a manner that this slit is approx...
|
